PRODUCTS

Landscaping Products

Pavers

Small Rustic Rock Medium Rustic Rock	16" Old Chicago Brick Pavers		16" Old Used Red Brick Pavers		18" Rustick Flag
14" Rustic Flag	18" Black & Gray Flag		14" Black & Gray		Cut Stone Combo Available in TAN, BROWN or CHARCOAL

Edgers

24" Straight Red Used Brick Edging		24" Old Chicago Brick Edging	24" Straight Black, White & Gray Brick Edging	24" Old Chicago Radius Brick Edger

Tree Rings

24" Two Piece Red Used Brick Tree Ring		24" Two Piece Old Chicago Tree Ring	36" Two Piece Old Chicago Tree Ring
36" Two Piece Red Used Brick		14" Round Wood	18" Round Wood

Retaining Walls

Natural Stone

Oklahoma Weathered Field Stone Sizes 1) 1" - 3" 2) 3" - 5"

Mossy Boulders Sizes 1) 1 - 2 man 2) 200lb. plus

Polymeric Sand

Alliance DP SuperSand Bond www.supersandbond.com

Polymeric joint sand for use with most type of landscaping pavers such as :

• brick pavers
• limestone pavers
• concrete pavers
• stone pavers
• patio pavers
• interlocking pavers
• driveway pavers

SuperSand Bond polymeric sand
SuperSand Bond is a unique mixture of polymer binders and a calibrated sand, available in brown or grey. The installation of this polymeric sand is almost identical to using regular paver joint sand, except for the application of water. Once SuperSand Bond sets, it becomes very firm and locks between the paver joints. This firm bond maintains pavers securely in place, being equally effective on both horizontal and sloped surfaces. It also withstands erosion due to climatic conditions, such as wind, rain and freezing temperatures. SuperSand Bond is recommended for a variety of uses, including pool sides, patios, foot paths, driveways, parking spaces, pavements, etc.

Ideal stabilizing sand to fill paver joint SuperSand Bond has the ability to expand and condense. This elasticity ensures that the paver joints avoid cracking and are properly filled at all times. Thus, it will also help prevent insect penetration and weed sprouting. SuperSand Bond should only be used when pavers or tiles are installed on a drainage bed system (stone dust, crushed stone, sand). It is not recommended when pavers or tiles are set above a concrete base. Make your home a more beautiful place to live with the texture, pattern and color of pavers.

Pavers are locally available in a variety of warm colors, and enable you to personalize any outdoor area. Natural or concrete pavers provide a durable and beautiful alternative to concrete or asphalt for patios, walkways, driveways, even streets. Over 200 million square feet of pavers have been installed in North America, and the popularity of these materials is rising steadily. Numerous options exist for size, shape, color and texture. When installed using a polymeric sand such as SuperSandBond, the surface is flexible, withstanding loads, wear and weather. Once SuperSandBond dries, the product stabilizes to a firm yet flexible consistency and "locks" permanently into the joints. The joints eliminate the cracking common to concrete surfaces. Pavers stand up well to snow removal processes and resist deicing salts better than conventional asphalt or concrete pavement.

Features

• Helps prevent weed sprouting
• Helps prevent damages caused by insects
• Helps prevent water erosion
• Sets as soon as water is sprayed
• Sets at above freezing temperature (0 C - 32 F)
• Can be applied even if storm is expected (3 hours at a minimum before it rains).
• Will maintain elasticity under weather conditions, insuring that paver joints are always properly filled.
• Does not stain paving stone.

Method of application of SuperSand Bond for a new paver job:

1. Install pavers and compact.
2. Make sure the top of the pavers are dry. Sweep the polymeric sand in between the paver joints and then compact.
3. Sweep off all the excess sand on the paver surface. Insure SuperSand Bond lies below the top of the paver. (repeat step 2 if necessary).
4. Direct a fine mist of water in the air to dampen all the SuperSand Bond joints. Dampen until there is some water retention on the paver joints (30 seconds).
5. Minimize or avoid, if possible, walking on the pavers for at least 4 hours after the installation of SuperSand Bond.

Method of application of SuperSand Bond for an existing paver job:

1.. Pressure wash off all the existing paver joint filling material, from the top of the paver to the bottom.
2.. Do not combine with any other products (follow steps 2 to 5 of new paver job application).

Surface coverage
22.7 kg (50 lbs) of SuperSand Bond polymeric sand will cover 6.58 to 8.13 square meters (73 to 90 square feet) if joints are narrow or 2.17 to 4.26 square meters (24 to 47 square feet) if joints are wide. Quantity required depends on shape and size of paving stone or slab as well as width of joints.

Note on polymeric paver sand
Do not apply on wet or damp surface since bonding unit action may cause SuperSand Bond to stick on surface and avoid proper sliding in joint. Do not use if rain is expected within 3 hours. Do not mix SuperSand Bond with cement or any other product. Avoid excessive watering or flooding of paved surfaces. Do not use this product as a mortar substitute.

Packaging
Product Retail Size Unit per Pallet
SuperSand Bond - Brown 22,7 kg (50 lbs) 50
SuperSand Bond - Grey 22,7 kg (50 lbs) 50
-Plastic bags
-Intact pallets can be stored outside

Photos represent general color ranges and surface textures of products. Precise color match to actual product may vary due to variations in monitors and printing techniques, please consult Cobble Rock & Stone to view actual products, or visit your nearest supplier/distributor.